<?xml version="1.0" encoding="utf-8"?>
<LibraryEntry xmlns="http://exocad.com/model/attachment">
	<Supplier>exocad GmbH</Supplier>
	<DisplayInformation>Diamond Full Auto-Connect with Occlusal Stop</DisplayInformation>
	<AttachmentPreviewFileName>preview.png</AttachmentPreviewFileName>
	<SupplierLogoFileName>logo.png</SupplierLogoFileName>
	<AttachmentDescription>
	
Attachment for connecting printed models to Diamond Articulators. No glue, self-artiucaltes. bdiart.com 

	</AttachmentDescription>
	<Placement Move="XY" Rotate="Z">
		<Translation Axis="XY" Ref="_clickpoint" DirRef="_clickpoint">
			<Const>0.0</Const>
		</Translation>
		<Translation Axis="Y">
			<Const>-30</Const>
		</Translation>
	</Placement>
	<Parameter Id="LedgeHeight" Scope="All" Decimals="1" Min="4" Max="12" Default="6">Ledge height</Parameter>
	<Parameter Id="Diameter" Scope="All" Decimals="1" Min="5" Max="8" Default="7">Ledge Diameter</Parameter>
	<ControlPoint Id="cp-upper-right" UniqueId="diamondfullcpupperright">
		<Location>
			<z>1</z>
		</Location>
		<Alignment Jaw="Upper" RelativeToBottom="true"/>
		<Translation Axis="X">
			<Const>4.5</Const>
		</Translation>
	</ControlPoint>
	<ControlPoint Id="cp-upper-right-center" UniqueId="diamondfullcpupperrightcenter" Type="ProjectXY">
		<Location>
			<z>1</z>
		</Location>
		<Alignment Jaw="Upper" RelativeToBottom="true"/>
		<Translation Axis="X">
			<Const>4.5</Const>
		</Translation>
	</ControlPoint>
	<Component ForceJaw="Upper" Id="beam-upper-right" UniqueId="diamondfullbeamupperright">
		<Profile Mirror="true">
			<Point>
				<x>0</x>
				<z>1</z>
			</Point>
			<Point>
				<x>1</x>
				<z>1</z>
			</Point>
			<Point>
				<x>1</x>
				<z>0</z>
			</Point>
			<Point>
				<x>0</x>
				<z>0</z>
			</Point>
			<Front ExtendTo="cp-upper-right-center" FailCap="Round"/>
			<Back Cap="Round"/>
			<Scaling Axis="X">
				<ParameterRef Coefficient="0.5">Diameter</ParameterRef>
				<Const>0.5</Const>
			</Scaling>
			<Scaling Axis="Z">
				<ParameterRef>LedgeHeight</ParameterRef>
			</Scaling>
			<Alignment Jaw="Upper" RelativeToBottom="true"/>
			<Orientation Axis="Y" Pivot="cp-upper-right" Towards="cp-upper-right-center"/>
			<Translation Axis="X">
				<Const>4.5</Const>
			</Translation>
			<Translation Axis="Y">
				<Const>6</Const>
			</Translation>
			<Translation Axis="Z">
				<Const>-0.001</Const>
			</Translation>
		</Profile>
		<mat:Material xmlns:mat="http://exocad.com/config/color">
			<mat:Color>#4B4374</mat:Color>
			<mat:Opacity>0.5</mat:Opacity>
		</mat:Material>
	</Component>
	<ControlPoint Id="cp-lower-right" UniqueId="diamondfullcplowerright">
		<Location>
			<z>1</z>
		</Location>
		<Alignment Jaw="Lower" RelativeToBottom="true"/>
		<Translation Axis="X">
			<Const>4.5</Const>
		</Translation>
	</ControlPoint>
	<ControlPoint Id="cp-lower-right-center" UniqueId="diamondfullcplowerrightcenter" Type="ProjectXY">
		<Location>
			<z>1</z>
		</Location>
		<Alignment Jaw="Lower" RelativeToBottom="true"/>
		<Translation Axis="X">
			<Const>4.5</Const>
		</Translation>
	</ControlPoint>
	<Component ForceJaw="Lower" Id="beam-lower-right" UniqueId="diamondfullbeamlowerright">
		<Profile Mirror="true">
			<Point>
				<x>0</x>
				<z>1</z>
			</Point>
			<Point>
				<x>1</x>
				<z>1</z>
			</Point>
			<Point>
				<x>1</x>
				<z>0</z>
			</Point>
			<Point>
				<x>0</x>
				<z>0</z>
			</Point>
			<Front ExtendTo="cp-lower-right-center" FailCap="Round"/>
			<Back Cap="Round"/>
			<Scaling Axis="X">
				<ParameterRef Coefficient="0.5">Diameter</ParameterRef>
				<Const>0.5</Const>
			</Scaling>
			<Scaling Axis="Z">
				<ParameterRef>LedgeHeight</ParameterRef>
			</Scaling>
			<Alignment Jaw="Lower" RelativeToBottom="true"/>
			<Orientation Axis="Y" Pivot="cp-lower-right" Towards="cp-lower-right-center"/>
			<Translation Axis="X">
				<Const>4.5</Const>
			</Translation>
			<Translation Axis="Y">
				<Const>6</Const>
			</Translation>
			<Translation Axis="Z">
				<Const>0.001</Const>
			</Translation>
		</Profile>
		<mat:Material xmlns:mat="http://exocad.com/config/color">
			<mat:Color>#4B4374</mat:Color>
			<mat:Opacity>0.5</mat:Opacity>
		</mat:Material>
	</Component>
	<ControlPoint Id="cp-upper-left" UniqueId="diamondfullcpupperleft">
		<Location>
			<z>1</z>
		</Location>
		<Alignment Jaw="Upper" RelativeToBottom="true"/>
		<Translation Axis="X">
			<Const>-4.5</Const>
		</Translation>
	</ControlPoint>
	<ControlPoint Id="cp-upper-left-center" UniqueId="diamondfullcpupperleftcenter" Type="ProjectXY">
		<Location>
			<z>1</z>
		</Location>
		<Alignment Jaw="Upper" RelativeToBottom="true"/>
		<Translation Axis="X">
			<Const>-4.5</Const>
		</Translation>
	</ControlPoint>
	<Component ForceJaw="Upper" Id="beam-upper-left" UniqueId="diamondfullbeamupperleft">
		<Profile Mirror="true">
			<Point>
				<x>0</x>
				<z>1</z>
			</Point>
			<Point>
				<x>1</x>
				<z>1</z>
			</Point>
			<Point>
				<x>1</x>
				<z>0</z>
			</Point>
			<Point>
				<x>0</x>
				<z>0</z>
			</Point>
			<Front ExtendTo="cp-upper-left-center" FailCap="Round"/>
			<Back Cap="Round"/>
			<Scaling Axis="X">
				<ParameterRef Coefficient="0.5">Diameter</ParameterRef>
				<Const>0.5</Const>
			</Scaling>
			<Scaling Axis="Z">
				<ParameterRef>LedgeHeight</ParameterRef>
			</Scaling>
			<Alignment Jaw="Upper" RelativeToBottom="true"/>
			<Orientation Axis="Y" Pivot="cp-upper-left" Towards="cp-upper-left-center"/>
			<Translation Axis="X">
				<Const>-4.5</Const>
			</Translation>
			<Translation Axis="Y">
				<Const>6</Const>
			</Translation>
			<Translation Axis="Z">
				<Const>-0.001</Const>
			</Translation>
		</Profile>
		<mat:Material xmlns:mat="http://exocad.com/config/color">
			<mat:Color>#4B4374</mat:Color>
			<mat:Opacity>0.8</mat:Opacity>
		</mat:Material>
	</Component>
	<ControlPoint Id="cp-lower-left" UniqueId="diamondfullcplowerleft">
		<Location>
			<z>1</z>
		</Location>
		<Alignment Jaw="Lower" RelativeToBottom="true"/>
		<Translation Axis="X">
			<Const>-4.5</Const>
		</Translation>
	</ControlPoint>
	<ControlPoint Id="cp-lower-left-center" UniqueId="diamondfullcplowerleftcenter" Type="ProjectXY">
		<Location>
			<z>1</z>
		</Location>
		<Alignment Jaw="Lower" RelativeToBottom="true"/>
		<Translation Axis="X">
			<Const>-4.5</Const>
		</Translation>
	</ControlPoint>
	<Component ForceJaw="Lower" Id="beam-lower-left" UniqueId="diiamondfullbeamlowerleft">
		<Profile Mirror="true">
			<Point>
				<x>0</x>
				<z>1</z>
			</Point>
			<Point>
				<x>1</x>
				<z>1</z>
			</Point>
			<Point>
				<x>1</x>
				<z>0</z>
			</Point>
			<Point>
				<x>0</x>
				<z>0</z>
			</Point>
			<Front ExtendTo="cp-lower-left-center" FailCap="Round"/>
			<Back Cap="Round"/>
			<Scaling Axis="X">
				<ParameterRef Coefficient="0.5">Diameter</ParameterRef>
				<Const>0.5</Const>
			</Scaling>
			<Scaling Axis="Z">
				<ParameterRef>LedgeHeight</ParameterRef>
			</Scaling>
			<Alignment Jaw="Lower" RelativeToBottom="true"/>
			<Orientation Axis="Y" Pivot="cp-lower-left" Towards="cp-lower-left-center"/>
			<Translation Axis="X">
				<Const>-4.5</Const>
			</Translation>
			<Translation Axis="Y">
				<Const>6</Const>
			</Translation>
			<Translation Axis="Z">
				<Const>0.001</Const>
			</Translation>
		</Profile>
		<mat:Material xmlns:mat="http://exocad.com/config/color">
			<mat:Color>#4B4374</mat:Color>
			<mat:Opacity>0.8</mat:Opacity>
		</mat:Material>
	</Component>
	<Component ForceJaw="Upper" Id="arti-upper" UniqueId="diamondfullartiupper" Method="Additive">
		<MeshFile FileName="Diamond Full Auto-Connect Stops.sdfa">
			<Select Label="CUSP_1">
				<Scaling Axis="Z">
					<ParameterRef Coefficient="0.035713">@modelheight</ParameterRef>
				</Scaling>
			</Select>
			<Select>
				<Translation Axis="Z">
					<ParameterRef Coefficient="0.5">@modelheight</ParameterRef>
					<Const>0</Const>
				</Translation>
			</Select>
			<Alignment Jaw="Upper" RelativeToBottom="true"/>
		</MeshFile>
		<mat:Material xmlns:mat="http://exocad.com/config/color">
			<mat:Color>#4B4374</mat:Color>
			<mat:Opacity>1.0</mat:Opacity>
		</mat:Material>
	</Component>
	<Component ForceJaw="Lower" Id="arti-lower" UniqueId="diamondfullartilower" Method="Additive">
		<MeshFile FileName="Diamond Full Auto-Connect Stops.sdfa">
			<Select Label="CUSP_1">
				<Scaling Axis="Z">
					<ParameterRef Coefficient="0.035713">@modelheight</ParameterRef>
				</Scaling>
			</Select>
			<Select>
				<Translation Axis="Z">
					<ParameterRef Coefficient="0.5">@modelheight</ParameterRef>
					<Const>0</Const>
				</Translation>
			</Select>
			<Alignment Jaw="Lower" RelativeToBottom="true"/>
		</MeshFile>
		<mat:Material xmlns:mat="http://exocad.com/config/color">
			<mat:Color>#4B4374</mat:Color>
			<mat:Opacity>1.0</mat:Opacity>
		</mat:Material>
	</Component>
	<IntersectionTestOverride Result="Always">
		<ComponentRef>beam-lower-left</ComponentRef>
		<ComponentRef>beam-lower-right</ComponentRef>
		<BaseRef>Lower</BaseRef>
	</IntersectionTestOverride>
	<IntersectionTestOverride Result="Always">
		<ComponentRef>beam-upper-left</ComponentRef>
		<ComponentRef>beam-upper-right</ComponentRef>
		<BaseRef>Upper</BaseRef>
	</IntersectionTestOverride>
</LibraryEntry>
